If your labels are being affected by ink spitting, you likely have at least one of a handful of problems that need to be resolved. We recommend giving your press a good once over - is it properly cleaned? Has it been properly maintained? Have you removed any dried ink? Is everything aligned and installed correctly? If you responded yes to all of those - don’t fret; an affordable solution may still be your answer.
While providing press room consumables through Mark Andy Print Products was the final link in the chain to elevate Mark Andy as a Total Solutions Partner, we are always looking for new ways to better serve our customers. With the addition of Performance Blades, Mark Andy Print Products’ own doctor blades, we have done just that.
In my previous post, I broke down what Overall Equipment Effectiveness (O.E.E) is and taking the first step to improving your equipment O.E.E. to make your pressroom more efficient.
Mark Andy Print Products, the supplies and consumables division of Mark Andy Inc. have been named the preferred global distributor of RotoMetrics print and magnetic cylinders.
Tint sleeves (also, commonly known as flood coat rollers) are the paint roller of the print industry. They are the solution when you need to print a continuous ink, varnish or adhesive, flood coat your substrate, or print continuous lineal strips.
Mark Andy Print Products (MAPP) had a successful event exhibiting at Labelexpo Americas 2018 in Stand 749.